Types of Pixel Led Strip

 

T300K Controller

T300K Controller

 Description:

8 * 1024 = 8192 Pixels

Double line IC or single line IC with low speed, one interface controls 512 lamps, the play speed can reach 30 frames / s

Note

If the distance between controller and lamps is more than 50m we suggest using differential signal transmission control or Photoelectric isolated signal transmission control, please read the manual carefully. signal lines must be a cable, the best is Super five types of cable.

7. Application scope

LED digital tube, LED point light source the exterior light and a module pixel screen (dazzle color screens) high power DMX lighting.

8. Specific parameters

memory card

Type; SD card (if controlling so many lamps it is best to use the high speed SD card

capacity; 128MB-2GB

format; FAT

store file; *. led

physical parameters

working temperature; -30-85

weight; 1.35 KG

work stress; AC220V

working power; 8 W.

size; L270mm * W180mm * H55mm

signal port: 3pin connect port

NOTE; T-300K Support online download the effect file to SD card.

Before copying files to SD card, The SD card must be formatted as FAT format.

The SD card in controller can't be hot-swappable, plug the SD card any time, you need to connect the power supply first

9. Differential signal transmission control

1. Purpose

For many great engineering, the distance between lamps and controller is more than 50m and less than 200m.

2 details

Built-in Signal transmitter above signal transmission Repeaters, signal transmission receiver

3 Appearance photo

attention

The distance between controller and transmission Repeaters between transmission Repeaters and transmission Repeaters between transmission Repeaters and signal transmission receiver cannot be more than 50 m, The maximum distance between controller and signal transmission receiver is 200 m

10. Trouble shooting

Question 1 controller after electrify indicator light is normal, but the lamps no effect change

answer: the reasons for this are the following:

(1) check lamps signal and controller have correct connection.

(2) If it meet TTL signal, lamps and lanterns and controller must be all the way, namely lamps GND (ground) to GND and controller (ground) got together.

(3) Check the effect file of SD card, the selected models or current lamps and use the chip consistently.

Question2

After power on, the T-300k ERROR indicator is flashing without display output

answer; The ERROR indicator flashing means that the controller has not read the card correctly, possible problems:

SD card is empty, with no effect file.

the effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file * led.

SD card not format to FAT before copy effect files.

Check the power supply voltage, the controller can be individually powered to close power reasons

changing the SD card and test to close the possibility of a bad SD card

T-8000AC Controller

Specifications:

Memory Card:

. Type: SD Card (included)
. Support Capacity: 128MB-2GB
. File Format: FAT file format
. Store files: *.led
Physical parameters:
. Temperature :-40-85 Degree
. Working Volgate: 110-240VAC
. Power:3W

Features: 

1. 256 Gray,Gamma correction processing software.
2. Support the rules and special-shaped handle.
3. Controller, 8 ports output, may support 8192 pixel lights.
4. Off-line control, play back content stored in the SD card
5. T-8000 store a maximum of 16 documents

6. the digital display, the matching chip models can be seen,
7. rainproof function, you can put it outdoor hang.

Great for controlling  decoration, advertising led pixel lights, etc.

 

T4000S Pixel Led Controller

Product Details:

• Display TypeLed
• ColorRGB
• Voltage5 V DC
• Model Name/NumberT4000s
• Power230 V AC
• Mounting TypePlug-In

 

Pixel led Controllers